Many computers use the Network Time Protocol (NTP) to synchronize their system clocks over the internet. NTP is one of the few unsecured internet protocols still in common use. An attacker that can observe network traffic between a client and server can feed the client with bogus data and, depending on the client’s implementation and configuration, force it to set its system clock to any time and date. Some programs and services might not work if the client’s system clock is not accurate. For example, a web browser will not work correctly if the web servers’ certificates appear to be expired according to the client’s system clock. Use Network Time Security (NTS) to secure NTP.
Fedora 331 is the first Fedora release to support NTS. NTS is a new authentication mechanism for NTP. It enables clients to verify that the packets they receive from the server have not been modified while in transit. The only thing an attacker can do when NTS is enabled is drop or delay packets. See RFC8915 for further details about NTS.
NTP can be secured well with symmetric keys. Unfortunately, the server has to have a different key for each client and the keys have to be securely distributed. That might be practical with a private server on a local network, but it does not scale to a public server with millions of clients.
NTS includes a Key Establishment (NTS-KE) protocol that automatically creates the encryption keys used between the server and its clients. It uses Transport Layer Security (TLS) on TCP port 4460. It is designed to scale to very large numbers of clients with a minimal impact on accuracy. The server does not need to keep any client-specific state. It provides clients with cookies, which are encrypted and contain the keys needed to authenticate the NTP packets. Privacy is one of the goals of NTS. The client gets a new cookie with each server response, so it doesn’t have to reuse cookies. This prevents passive observers from tracking clients migrating between networks.
The default NTP client in Fedora is chrony. Chrony added NTS support in version 4.0. The default configuration hasn’t changed. Chrony still uses public servers from the pool.ntp.org project and NTS is not enabled by default.
Currently, there are very few public NTP servers that support NTS. The two major providers are Cloudflare and Netnod. The Cloudflare servers are in various places around the world. They use anycast addresses that should allow most clients to reach a close server. The Netnod servers are located in Sweden. In the future we will probably see more public NTP servers with NTS support.
A general recommendation for configuring NTP clients for best reliability is to have at least three working servers. For best accuracy, it is recommended to select close servers to minimize network latency and asymmetry caused by asymmetric network routing. If you are not concerned about fine-grained accuracy, you can ignore this recommendation and use any NTS servers you trust, no matter where they are located.
If you do want high accuracy, but you don’t have a close NTS server, you can mix distant NTS servers with closer non-NTS servers. However, such a configuration is less secure than a configuration using NTS servers only. The attackers still cannot force the client to accept arbitrary time, but they do have a greater control over the client’s clock and its estimate of accuracy, which may be unacceptable in some environments.
Enable client NTS in the installer
When installing Fedora 33, you can enable NTS in the Time & Date dialog in the Network Time configuration. Enter the name of the server and check the NTS support before clicking the + (Add) button. You can add one or more servers or pools with NTS. To remove the default pool of servers (2.fedora.pool.ntp.org), uncheck the corresponding mark in the Use column.
Fedora installer
Enable client NTS in the configuration file
If you upgraded from a previous Fedora release, or you didn’t enable NTS in the installer, you can enable NTS directly in /etc/chrony.conf. Specify the server with the nts option in addition to the recommended iburst option. For example:
server time.cloudflare.com iburst nts server nts.sth1.ntp.se iburst nts server nts.sth2.ntp.se iburst nts
You should also allow the client to save the NTS keys and cookies to disk,
so it doesn’t have to repeat the NTS-KE session on each start. Add the
following line to chrony.conf, if it is not already present:
ntsdumpdir /var/lib/chrony
If you don’t want NTP servers provided by DHCP to be mixed with the servers you
have specified, remove or comment out the following line in
chrony.conf:
sourcedir /run/chrony-dhcp
After you have finished editing chrony.conf, save your changes and restart the chronyd service:
systemctl restart chronyd
Check client status
Run the following command under the root user to check whether the NTS key
establishment was successful:
# chronyc -N authdata Name/IP address Mode KeyID Type KLen Last Atmp NAK Cook CLen ========================================================================= time.cloudflare.com NTS 1 15 256 33m 0 0 8 100 nts.sth1.ntp.se NTS 1 15 256 33m 0 0 8 100 nts.sth2.ntp.se NTS 1 15 256 33m 0 0 8 100
The KeyID, Type, and KLen columns should have non-zero values. If they are zero, check the system log for error messages from chronyd. One possible cause of failure is a firewall is blocking the client’s connection to the server’s TCP port ( port 4460).
Another possible cause of failure is a certificate that is failing to verify because the client’s clock is wrong. This is a chicken-or-the-egg type problem with NTS. You may need to manually correct the date or temporarily disable NTS in order to get NTS working. If your computer has a real-time clock, as almost all computers do, and it’s backed up by a good battery, this operation should be needed only once.
If the computer doesn’t have a real-time clock or battery, as is common with
some small ARM computers like the Raspberry Pi, you can add the -s
option to /etc/sysconfig/chronyd to restore time saved on the last
shutdown or reboot. The clock will be behind the true time, but if the
computer wasn’t shut down for too long and the server’s certificates were not
renewed too close to their expiration, it should be sufficient for the time
checks to succeed. As a last resort, you can disable the time checks with the
nocerttimecheck directive. See the chrony.conf(5) man page
for details.
Run the following command to confirm that the client is making NTP
measurements:
# chronyc -N sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^* time.cloudflare.com 3 6 377 45 +355us[ +375us] +/- 11ms ^+ nts.sth1.ntp.se 1 6 377 44 +237us[ +237us] +/- 23ms ^+ nts.sth2.ntp.se 1 6 377 44 -170us[ -170us] +/- 22ms
The Reach column should have a non-zero value; ideally 377. The value 377 shown above is an octal number. It indicates that the last eight requests all had a valid response. The validation check will include NTS authentication if enabled. If the value only rarely or never gets to 377, it indicates that NTP requests or responses are getting lost in the network. Some major network operators are known to have middleboxes that block or limit rate of large NTP packets as a mitigation for amplification attacks that exploit the monitoring protocol of ntpd. Unfortunately, this impacts NTS-protected NTP packets, even though they don’t cause any amplification. The NTP working group is considering an alternative port for NTP as a workaround for this issue.
Enable NTS on the server
If you have your own NTP server running chronyd, you can enable server NTS support to allow its clients to be synchronized securely. If the server is a client of other servers, it should use NTS or a symmetric key for its own synchronization. The clients assume the synchronization chain is secured between all servers up to the primary time servers.
Enabling server NTS is similar to enabling HTTPS on a web server. You just need a private key and certificate. The certificate could be signed by the Let’s Encrypt authority using the certbot tool, for example. When you have the key and certificate file (including intermediate certificates), specify them in chrony.conf with the following directives:
ntsserverkey /etc/pki/tls/private/foo.example.net.key ntsservercert /etc/pki/tls/certs/foo.example.net.crt
Make sure the ntsdumpdir directive mentioned previously in the
client configuration is present in chrony.conf. It allows the server
to save its keys to disk, so the clients of the server don’t have to get new
keys and cookies when the server is restarted.
Restart the chronyd service:
systemctl restart chronyd
If there are no error messages in the system log from chronyd, it should be
accepting client connections. If the server has a firewall, it needs to allow
both the UDP 123 and TCP 4460 ports for NTP and NTS-KE respectively.
You can perform a quick test from a client machine with the following command:
$ chronyd -Q -t 3 'server foo.example.net iburst nts maxsamples 1' 2020-10-13T12:00:52Z chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP +SCFILTER +SIGND +ASYNCDNS +NTS +SECHASH +IPV6 +DEBUG) 2020-10-13T12:00:52Z Disabled control of system clock 2020-10-13T12:00:55Z System clock wrong by -0.001032 seconds (ignored) 2020-10-13T12:00:55Z chronyd exiting
If you see a System clock wrong message, it’s working
correctly.
On the server, you can use the following command to check how many NTS-KE
connections and authenticated NTP packets it has handled:
# chronyc serverstats NTP packets received : 2143106240 NTP packets dropped : 117180834 Command packets received : 16819527 Command packets dropped : 0 Client log records dropped : 574257223 NTS-KE connections accepted: 104 NTS-KE connections dropped : 0 Authenticated NTP packets : 52139
If you see non-zero NTS-KE connections accepted and Authenticated
NTP packets, it means at least some clients were able to connect to the
NTS-KE port and send an authenticated NTP request.
— Cover photo by Louis. K on Unsplash —
. The Fedora 33 Beta installer contains an older chrony prerelease which doesn’t work with current NTS servers because the NTS-KE port has changed. Consequently, in the Network Time configuration in the installer, the servers will always appear as not working. After installation, the chrony package needs to be updated before it will work with current servers.
